The commerciality of Air Conditioners has never been like present times. It has become a necessity for people trying to survive the hot weather. People tend to make significant investments while purchasing an air conditioner. After spending a huge chunk on its purchase, it’s important to make sure that the AC is installed correctly. Air Conditioners are primarily responsible for skyrocketing your DEWA bills and if improperly installed, can create significant differences in your bill amounts. Some common mistakes happen during installation and need to be avoided. This article lists all the AC installation issues that can cause potential harm to your aircon system.
When it comes to Air Conditioners, it’s not ‘one size fits all’ nor it’s ‘the bigger, the better’. Choosing the adequate size for air conditioners is directly related to their performance. If you choose an air conditioner that is bigger for your space, it will cause humidity problems, short cycling, and other energy efficiency issues leading to premature wear and tear of the system.
On the other hand, a system smaller than the required unit will cause extra strain on the system by forcing it to work more than usual resulting in a dysfunctional unit. It will also affect your electricity bills.
The right size of the Air Conditioner depends on various factors including the type of living space (house, apartment, office, commercial building), number of people living in the building, size of the rooms, and many more.
You can consult a professional HVAC Technician who will guide you in selecting the appropriate size for your Air Conditioner.
Improper Condenser Placement:
One of the most ignored factors during the installation of an AC unit is its apt condenser placement. Rightly placed AC units can save up on electricity costs, and prolong the system’s life span. Unit maintenance is necessary for keeping the condenser in check, but maintenance comes later than installation. Proper installation is needed first. Do not install the condenser in direct sunlight; otherwise, it will use more energy to cool down the living space. Make sure to place it under the shade and away from any blocking elements to ensure air circulation. Also, the unit should be leveled correctly.
Improper Ductwork Sealing and Insulation:
Sealing and Insulation is one of the important parts of AC installation. Improper sealing of the ductwork results in the escaping of the forced air through the cracks and holes. This results in cooling waste and causes the system to consume more energy to properly cool the space. During installation, make sure to seal all the gaps in the ductwork with a permanent sealer and not with tape which is a temporary solution. All the other gaps and holes in the house must also be insulated to keep the conditioned air within the boundaries of the habitat. You can call in an HVAC Technician who can do all the work of proper sealing and insulation for you.
Incorrect Refrigerant Charge:
During the installation process, the refrigerant cylinder can get punctured. Therefore, the refrigerant levels should be checked immediately after the installation process. Refrigeration leaks can be hazardous to health as well as spike up your electricity bills. Under refrigeration can also cause your system to malfunction. The refrigerant should be inspected for holes and sealed properly by a professional HVAC Technician. Beware of the fact that every 10% loss of refrigerant can cause a 20% increase in your electricity bills.
Faulty Drainage System:
One of the AC Installation mistakes is not implementing the drainage system properly. Water that is formed during the cooling process must be evacuated through a proper channeling system otherwise it will cause mold, moisture, and sogginess in the building and air channels. One should call a trained HVAC Technician to put a drainage system in the proper place.
Incorrect Thermostat Positioning:
Ignoring the importance of correct positioning for thermostat installation is quite a common AC installation issue. The thermostat is responsible for monitoring and adjusting the temperature of the air conditioner according to its surroundings.
To assess the accurate temperature of the living space, the thermostat needs to be in a moderate temperature zone. That is why the thermostat must be installed in a place where direct sunlight can’t reach it. It must also be placed at a farther distance from the vents. If not properly placed, it can increase electricity bills and temperature readings can be inaccurate.
Vents must be placed in a place where it won’t block airflow. The most adequate place for mounting the vents is on the walls and higher surfaces where furniture and other objects won’t come in the way and cover the outlet.
Blocked vents can disrupt the airflow and take more time to cool the area. On the other hand, vents placed on lower surfaces can get clogged more easily.
Skipping the Manual:
Every Air Conditioner comes with a user-guide manual which is AC model and manufacturer-specific. Most people make the mistake of ignoring that manual and like to do the installation on their terms which sometimes proves to be a grave mistake and costs money. One should consult their user-guide manual to avoid costly mistakes.
Everyone likes to save money but sometimes in our attempts to fix things while staying at low cost, we tend to do more costly damage than good. AC Installation is one of those processes where one shouldn’t attempt to do DIY tricks; otherwise, it can void your warranty. HVAC Technicians are there for a reason. They can pay attention to the nitty-gritty details of the installation which you can’t. So you should let them do their work.
Al-Imran Technical Services is one of those companies that provide AC Installation Services at low costs without compromising on quality. You can trust us with your costly investment; it is safe in our hands.
Avoiding common AC installation mistakes is essential for ensuring your system operates efficiently, lasts longer, and provides the comfort you desire in your home. Remember, consulting with a professional HVAC technician is the best way to ensure your AC installation is error-free and provides years of reliable cooling comfort.